Huizhou (HK) Yingyuan Technology
137-2371-6834 Timber (WhatsApp)
A rectifier load is an electronic component that converts AC electrical energy into DC electrical energy, while a nonlinear rectifier load is a special type of rectifier load, and its relationship between current and voltage is not linear. So, how does nonlinear rectifier load work? This article will provide a detailed introduction to its working principle, characteristics, and applications.1. Working principleThe core of nonlinear rectifier loads is rectifier diodes. A rectifier diode is an electronic component with unidirectional conductivity that only allows current to flow in one direction. When the forward voltage acts on the rectifier diode, it will conduct and the current can pass smoothly; When the reverse voltage acts on the rectifier diode, it will cut off and current cannot pass through.By utilizing the unidirectional conductivity of rectifying diodes, we can convert alternating current into direct current. Specifically, when the positive half cycle of alternating current i...
2024
The relationship between charger voltage and currentWhen choosing a charger, we usually focus on two parameters: voltage and current. Voltage refers to the potential energy transmitted by electrical energy in a circuit, measured in volts (V); Current refers to the number of electrons transferred by electrical energy in a circuit, measured in amperes (A). The product of voltage and current is the power, measured in watts (W).Most electronic devices have a charger voltage of 5 volts or 9 volts, and the current is usually between 1 and 2.4 amperes. This means that if the voltage of two chargers is the same but the current is different, they may be interchangeable, but attention should be paid to whether the charging time and charger power are compatible.The impact of chargers with different powers on devicesThe power of the charger varies, which can affect the charging speed of the device. For example, when you choose a 1-ampere charger to charge your phone, it can only deliver a 1-amper...
Car charger is a charging device that converts 12V voltage from a socket to 5V USB voltage. It has the characteristics of low power consumption, simplicity, convenience, and low price. When using a car charger, pay attention to the following points:1. Plug in the charger before startingPlease do not plug in the charger before starting the car to avoid voltage damage to the charger during car startup. The correct approach is to plug in the car charger after startup.2. Do not use chemicals, detergents, or strong detergents to clean the chargerBecause the functionality of the car charger may be compromised. Do not use chemicals, detergents, or strong detergents to clean the charger, as this may affect its normal use.3. Pay attention to the usage environmentDuring use, please be careful not to be exposed to humid air due to accidental water ingress or long-term non use. Please try not to use a car charger when the temperature inside the car is too high.4. After the vehicle is turned off,...
1.What is a high-power charger?A high-power charger is a faster and stronger charging device than a regular charger, which can charge devices such as smartphones and tablets faster through higher current output. However, due to the greater heat generated by high-power chargers, safety issues are also more likely to attract attention.2. Common types of high-power chargers(1) Fast chargingFast charging is a widely used high-power charger on the market, with mainstream fast charging protocols including QC, FCP, VOOC, Dash Charge, etc., which can fully charge devices in a short period of time. However, due to compatibility issues with different protocols, it is necessary to choose chargers that support the corresponding fast charging protocol for different brands and models of devices.(2) PD chargingPD charging is currently the latest fast charging standard, supporting higher power and faster charging speeds, while also compatible with the charging needs of various devices. A PD charger c...
With the continuous progress and innovation of technology, electronic products are playing an increasingly important role in our daily lives. However, as one of the core components of electronic products, the quality and stability of the power supply are crucial for the reliability and performance of the product. In order to ensure the quality and safety of products, a variety of power supply ATE (Automatic Test Equipment) systems have emerged.Power supply automatic testing machineSo, what does the power supply ATE testing system mean? Simply put, it is a device that can comprehensively test the power supply. It can simulate various power supply conditions, such as input voltage, current, power supply factor, temperature, etc. By testing the performance and stability of the power supply under different working conditions, it ensures that it meets various standards and requirements. At the same time, the power supply ATE testing system can also detect the response ability and stability...