Welcome to Shenzhen KINRI Energy Technology Co.,Ltd. official website!
Language：

Shenzhen KINRI Energy Technology Co.,Ltd.

SHENZHEN KINRI ENERGY

Huizhou (HK) Yingyuan Technology

Support Hotline

137-2371-6834 Timber (WhatsApp)

Shenzhen KINRI Energy Technology Co.,Ltd.
Knowledge
Current Location: Home > Knowledge > Knowledge

Knowledge

0755-29665062

Certificate

Shenzhen KINRI Energy Technology Co.,Ltd.
Knowledge

Selection and Use of UK standard  Power Supplies

Article Source：Kinri Energy | Author：Kinri Energy | Issuing Time：2024.05.25
The UK standard power outlet is a UK standard power outlet, which has certain differences from the power outlets in China. In the UK, there are three specifications of power sockets used by people, namely I II. Type III. Among them, Type I is the most common specification, with a three pin plug consisting of a ground wire, neutral wire, and live wire above, and a switch and fuse below. Type II and III sockets are two pin plugs and circular plugs, respectively.


UK standard 5W MODEM POWER ADAPOR

When using UK standard power supplies, the following points should be noted:

Firstly, it is important to understand the specifications of UK standard power supplies and the shape of plugs to avoid damage or fire caused by incorrect insertion. When purchasing UK standard power adapters or converters, be sure to choose plugs and sockets that comply with UK standards.

Secondly, when selecting a UK standard power adapter or converter, attention should be paid to its voltage and current parameters to ensure that it meets the requirements of the electrical appliance. At the same time, attention should also be paid to its power size to ensure that it can provide sufficient electricity for the electrical appliance.

In addition, when using UK standard power supplies, attention should be paid to their insertion and removal methods, that is, the plug should be inserted vertically into the socket, and not tilted or used too hard to avoid damaging the socket or plug. At the same time, when pulling out the plug, be careful not to use too much force to avoid damaging the plug and socket.

In short, special attention should be paid to safety and correctness when using UK standard power supplies. To avoid safety hazards or electrical damage, we need to choose UK standard power adapters or converters that meet the specifications and use the correct plugging and unplugging methods. At the same time, it is also important to keep the socket dry and clean to avoid problems such as leakage or short circuits.
Back List
Shenzhen KINRI Energy Technology Co.,Ltd.

Scan And Follow Us

  • Phone:+86-137-2371-6834 Timber (WhatsApp)
  • Tel:+86-0755-29665062
  • Email:mkt1@jinruipower.com
  • Add: No. 13A16 Huafeng International Commercial Building, No.4018 Bao’an Avenue, Xixiang, Baoan District, Shenzhen China
Copyright © 2009 Shenzhen KINRI Energy Technology Co.,Ltd. All Rights Reserved.
Clients: Mexican Telecom, ZTE, Mindray, Sony, Microsoft, Toshiba, Ohm Electronics, MT, MG and so on international famous brands