Welcome to Shenzhen KINRI Energy Technology Co.,Ltd. official website!
Language：

Shenzhen KINRI Energy Technology Co.,Ltd.

SHENZHEN KINRI ENERGY

Huizhou (HK) Yingyuan Technology

Support Hotline

137-2371-6834 Timber (WhatsApp)

Shenzhen KINRI Energy Technology Co.,Ltd.
Knowledge
Current Location: Home > Knowledge > Knowledge

Knowledge

0755-29665062

Certificate

Shenzhen KINRI Energy Technology Co.,Ltd.
Knowledge

How to install UPS power supply?

Article Source：Kinri Energy | Author：Kinri Energy | Issuing Time：2024.03.26
UPS power supply is a device that can provide emergency power in the event of power interruption or voltage fluctuations. It is widely used in various occasions, including homes, offices, data centers, and other places.



The installation of UPS power generally includes the following steps:

1. Choose installation location: The UPS power supply needs to be placed in a dry, ventilated, away from heat sources and direct sunlight. It is also necessary to fully consider the length and direction of the connection wires between the UPS power supply and equipment to ensure convenient and safe connection.

2. Install battery module: Install the built-in battery module of the UPS power supply into the UPS power supply chassis, which may need to be completed before device installation.

3. Set dry contact function: The dry contact function of UPS power supply can inform the system of power failure information, which needs to be set during installation.

4. Connect UPS power supply: According to the equipment selection and connection requirements, connect the input and output terminals of the UPS power supply, and pay attention to the correctness and tightness of the connection. After connecting, it is necessary to check whether the connecting wires are secure and in normal contact.

5. Grounding connection: Connect the grounding wire of the UPS power supply case to the equipment grounding plug, ensuring that the grounding potential of the UPS power supply and the protected equipment is the same.

6. Connection network route: If the UPS power supply supports network connection, the network route needs to be connected to the network port of the UPS power supply to achieve network monitoring and management of the UPS power supply.

7. Startup and Testing: Follow the operating steps in the UPS power supply manual to start the UPS power supply, and perform necessary testing and calibration to ensure the integrity and stability of the UPS power supply. It is recommended to install with installation personnel to avoid unnecessary safety risks.

Overall, the installation of UPS power supplies requires careful and careful operation, strictly following the instructions and relevant regulations. Only correctly installed UPS equipment can provide users with reliable power protection, protecting their equipment from power interference and damage. I hope everyone can take UPS power seriously when installing it, ensuring the normal operation of the equipment and the safe use of users.
Back List
Shenzhen KINRI Energy Technology Co.,Ltd.

Scan And Follow Us

  • Phone:+86-137-2371-6834 Timber (WhatsApp)
  • Tel:+86-0755-29665062
  • Email:mkt1@jinruipower.com
  • Add: No. 13A16 Huafeng International Commercial Building, No.4018 Bao’an Avenue, Xixiang, Baoan District, Shenzhen China
Copyright © 2009 Shenzhen KINRI Energy Technology Co.,Ltd. All Rights Reserved.
Clients: Mexican Telecom, ZTE, Mindray, Sony, Microsoft, Toshiba, Ohm Electronics, MT, MG and so on international famous brands